atlas copco air compressor 450cfm (1)

Choosing the Right Air Compressor for Your Workshop or Site: An Atlas Copco Guide for Nigerian Industries

By Kuzor Technical Services, The Bosch Store, Port Harcourt | Published October 23, 2026 | 2-minute read

Quick answer: To choose the right air compressor, match its airflow (CFM), pressure (PSI), tank size, and compressor type to your tools and daily workload. Kuzor Technical Services supplies Atlas Copco air compressors and can advise you at 51 Trans-Amadi Rd, Nkpogu, Port Harcourt.

An air compressor powers your pneumatic tools, from impact wrenches and spray guns to grinders and nail guns. A unit that is too small stalls your work. One that is too big wastes money and electricity. This guide will help you get it right the first time.

Understand the Three Key Numbers

1. CFM (cubic feet per minute) measures how much air the compressor delivers. This is the most important figure. Check the CFM requirement of each tool you plan to run, add them together, then add about 30% as a safety margin.

2. PSI (pounds per square inch) measures air pressure. Most pneumatic tools work at around 90 PSI, but check your tool’s rating and choose a compressor that exceeds it.

3. Tank size (litres) is the air storage. A larger tank gives steadier supply and fewer motor cycles, which suits tools that use air in bursts.

Pick the Right Compressor Type

TypeBest ForKey Strength
Piston (reciprocating) compressorSmall workshops, garages, intermittent useAffordable and simple to maintain
Rotary screw compressorFactories, fabrication yards, continuous operationSteady output and built for long running hours
Oil-free compressorFood, pharmaceutical, painting, and clean-air workClean air with no oil carryover
Portable or diesel compressorField work and sites without reliable powerMobility and independence from the grid

Other Factors Nigerian Buyers Should Check

  • Power supply: Confirm whether you have single-phase or three-phase power. In areas with unstable supply, consider a generator-ready setup or a diesel unit.
  • Duty cycle: How many hours a day will it run? Heavy-use operations need industrial-grade machines.
  • Air quality: Dryers and filters protect tools and finished surfaces from moisture and dust.
  • Service and spare parts: A compressor is only as good as its support. Choose a supplier who can help after the sale.
  • Operating environment: Heat, humidity, and dust affect performance, so ask about proper ventilation and servicing intervals.

Why Buy Atlas Copco

Atlas Copco is a globally recognised name in industrial air compressors. Its machines are known for efficiency, reliability, and long service life, which matters for workshops, manufacturing plants, and maintenance teams that cannot afford downtime.

Pair your compressor with accurate tools for the rest of the job. Read about the Bosch GLM laser measures and BT tripods or our guide to buying original Bosch Professional Tools in Port Harcourt.

Get an Atlas Copco Quote in Port Harcourt

Prices depend on capacity, type, and power source, so contact us with your CFM, PSI, and power requirements for a tailored recommendation. View our air compressors online, or reach us directly:

Kuzor Technical Services, The Bosch Store
51 Trans-Amadi Rd, Nkpogu, Port Harcourt 500101, Rivers State
Phone: +234 906 499 5130
Email: Sales@kuzortech.com

demo-attachment-1112-sidney-pearce-WRgKwttuP7A-unsplash

How to Detect Hidden Pipes, Cables, and Metal Before You Drill: The Bosch GMS 120 Multi-Detector Explained

By Kuzor Technical Services, The Bosch Store, Port Harcourt | Published October 23, 2026 | 2-minute read

The Bosch GMS 120 multi-detector is a handheld wall scanner that locates metal, wood, and live electrical wires behind walls, floors, and ceilings before you drill, cut, or fix. It is available at Kuzor Technical Services, 51 Trans-Amadi Rd, Nkpogu, Port Harcourt.

One drill bit through a live cable or a metal pipe can mean injury, a burst line, power outage, or an expensive repair. For electricians, plumbers, and maintenance teams, scanning first is basic good practice. A Bosch multi-detector makes that check fast and simple.

What Is the Bosch GMS 120 Multi-Detector?

The Bosch GMS 120 is a compact metal and cable detector and wall scanner. You move it across the surface, and it signals when it finds something hidden underneath. It helps you detect:

  • Ferrous metals, such as steel reinforcement bars and metal pipes
  • Non-ferrous metals, such as copper pipes
  • Live electrical wires carrying current
  • Wooden studs and joists for secure fixing

How to Scan a Wall Safely

  1. Switch on and calibrate the detector on the wall surface, away from known objects.
  2. Choose the right mode for what you are looking for.
  3. Move the detector slowly and in a straight line across the area.
  4. Mark the spot when the detector signals, then scan again from a different direction to confirm.
  5. Drill only in a clear area.

Safety note: A detector is a support tool, not a guarantee. Wall material, moisture, and depth can affect results. Always follow site safety rules, check building drawings where available, and isolate power when working near electrical installations.

Where the GMS 120 Adds Value

  • Electricians: avoid live cables when chasing walls or fixing conduits.
  • Plumbers: locate metal pipework before cutting or drilling.
  • Construction teams: find rebar before anchoring or coring.
  • Facility and industrial maintenance teams: reduce downtime and repair costs during installations and upgrades.

Pair it with a Bosch laser measure and tripod for accurate marking after you scan. Not sure where to start? Read our guide to buying original Bosch Professional Tools in Port Harcourt.

Buy the Bosch GMS 120 in Port Harcourt

View the GMS 120 Multi-Detector and our other detection and measuring instruments online, or visit us:

Kuzor Technical Services, The Bosch Store
51 Trans-Amadi Rd, Nkpogu, Port Harcourt 500101, Rivers State
Phone: +234 906 499 5130
Email: Sales@kuzortech.com

Frequently Asked Questions

What does the Bosch GMS 120 multi-detector detect?
It detects ferrous and non-ferrous metals, live electrical wires, and wooden studs behind walls, floors, and ceilings.

Why should I scan before drilling?
Scanning helps you avoid damaging hidden cables and pipes, which prevents injuries, repair costs, and project delays.

Who should use a multi-detector?
Electricians, plumbers, builders, and industrial maintenance teams all benefit from it.

Where can I buy a Bosch multi-detector in Port Harcourt?
At Kuzor Technical Services, The Bosch Store, 51 Trans-Amadi Rd, Nkpogu, or by phone, email, or our online store.